Ge 45613 GE Z-Wave 3-Way Dimmer Kit with Terminals Manual do Utilizador descarregar pdf (Página 18)

Invert Switch

If the switch is accidentally installed upside down with “On” at the

bottom and “Off” at the top, the default On/Off rocker settings can

be reversed by changing parameter 4’s value to “1”.

• Parameter No: 4

• Length: 1 Byte

• Valid Values = 0 or 1 (default 0)

Dim Rate Adjustments

Both the number of steps (or levels) that the dimmer will change

and the timing of the steps can be modiﬁed to suit personal

preferences. The timing of the steps can be adjusted in 10

millisecond intervals.

1.. When Receiving a Z-Wave Dim Command

• Parameter 7 (number of steps or levels)

• Parameter 8 (timing of the steps)

• Length: 1 Byte

• Valid Values:

Parameter 7 (default = 1) Valid Values: 1-99

Parameter 8 (default = 3) Valid Values: 1-255

2. Manual Control Dimming (pressing the Dimmer’s rocker)

• Parameter 9 (number of steps or levels)

• Parameter 10 (timing of the steps)

• Length: 1 Byte

• Valid Values:

Parameter 9 (default = 1) Valid Values: 1-99

Parameter 10 (default = 3) Valid Values: 1-255

3. When Receiving an All-On or All-Off Command

• Parameter 11 (number of steps or levels)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Ge 45613 GE Z-Wave 3-Way Dimmer Kit with Terminals Manual do Utilizador Página 18