ThermostatsDigital Programmablege.comConfiguration Mode . . . . . . . . . . . .8–9Important Safety Information . . . .2Installation Instructions . .
Operation.The RAK148P1 and RAK164P1 thermostats have buttons that are used to:• Adjust the setpoints of the thermostat• Set the modes• Program the sch
Starting the thermostat.CAUTION! Do not use air conditioning whenthe outdoor temperature is below 50 degrees. This can damageyour air conditioning sys
Testing the thermostat.Heat Test1. Slide Function switch to Heatposition. Heat mode screen isdisplayed.2. Adjust set temperature so it is 5 degrees ab
Operating functions.Off• In this mode, the thermostat will not turn on the heating or coolingdevices (manual fan can operate).• Off is also used to ac
Setting the time and day of the week.The time and day of the week must be set for your programschedule to operate correctly.1. Slide the Function swit
Programming.Program OverviewThe programmable thermostat has four periods (MORN, DAY,EVE, NITE) that are customizable for each day of the week. Each pe
Programming.• Heat temperature is displayed(60°F to 85°F)10.Press the or button toadjust heat set temperature.11.Press the Hold button to advance to t
Factory preprogramming.The programmable thermostat comes preprogrammed with thefollowing schedule:MONDAY MORN 6:00 AM DAY 8:00 AM EVE 6:00 PM NITE 10:
Low battery indicator.The programmable thermostats with battery backup have a low battery warning screen. Please note that the low batterywarning will
Combination failure (power failure & low battery).The programmable thermostats with battery backup also will indicate a combination failure; that
2Important safety information.Specifications.WARNING! Always turn off power at themain power supply before installing, cleaning or removing the thermo
Troubleshooting tips.No display Check for 24 VAC at thermostat; display is blank when 24 VAC is not present.System fan does not Verify that wiring is
21Notes.
22Notes.
23Notes.
Thermostat Warranty.For The Period Of: GE Will Replace:One Year Full Replacement of the thermostat which failsFrom the date of the due to a defect in
INTRODUCTION OVERVIEW3PARTS DIAGRAMReset SwitchMode SwitchHold SwitchDisplayFunction SwitchFan Auto/OnSwitchToggle Up/Down SwitchesTHERMOSTAT CONTROLD
4INSTALLATION INSTRUCTIONSTO INSTALL THERMOSTATIMPORTANT: Thermostat installation must conform tolocal and national building and electrical codes and
5TO INSTALL THERMOSTAT (cont.)1. Turn off power to the heating and cooling system by removing the fuse or switching off the appropriatecircuit breaker
6TO INSTALL THERMOSTAT (cont.)14. Replace cover on thermostat by snapping it in place.15. Turn on power to the system at the main service panel.16. Te
7Table 2: Terminals for six wires 2 heat/1 cool system(RAK148P1 only)Note: Connect G terminal of thermostat to Zoneline Glterminal for low fan speed o
Configuration mode.The configuration mode is used to set the RAK148P1 and RAK164P1 to match your heating/cooling system. These thermostats function wi
3. Temperature Differential—Stage2—(RAK148P1 only) (1–9°F)(1–5°C)—Set the number ofdegrees between when stage 1turns on and stage 2 turns on.Press the
Comentários a estes Manuais