GE BL Series Guia de Instalação descarregar pdf (Página 1)

Lighting Solutions

imagination at work

(BL42, BL44 and BL45 Series)

Features

• Long life (50,000 hour rated life)

• 5 year warranty

• Dry location rated

Lumination

LED Luminaires

Installation Guide

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.

Minimum size 18 AWG (0.75mm

• Type IC, inherently protected.

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

• N’utilisez que des ls approuvés par UL pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.75mm

• Type IC, protection inhérente.

Provided in the package are:

• Luminare

• Universal mounting bracket (4 pieces)

• M3x12mm screws for mounting bracket installation (8 pieces)

• M3 wingnut (8 pieces)

• Ceiling grid safety screw for grid and bracket xing (4 pieces)

• Primary diffuser

• Optional low glare diffuser with protective lm

Tools and components required:

• For end cover install: Philips headed screwdriver

• Rigid (RMC) or exible (FMC) metal conduit for supply connection

• UL/cUL approved twist-on-wire connectors, min. 18 AWG

• UL/cUL approved conduit ttings for 1/2” conduit trade

size (2 pieces)

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - LED Luminaires

GELighting Solutionsimagination at work(BL42, BL44 and BL45 Series)Features• Long life (50,000 hour rated life)• 5 year warranty• Dry location ratedLu

Página 2 - Prepare Electrical Wiring

23A 3BRemove end cover closest to the cable glands. Retain star washer for reinstalling end cover.Two diffusers: Slide both diffusers into base of lum

Página 3 - Electrical Connections

Wiring for Lutron ControllerLutron dimming wires3Optional: If using a dimmer, connect black and red wires of the dimming line to the PSU dimming wires

Página 4 - Luminaire Installation

Wiring DiagramsFollow diagram A for 1-10V, diagram B for DALI or diagram C for Lutron dimming. At output side of LED driver, make appropriate connecti

Página 5

5For added safety, use additional celing grid screws to permanently x bracket to grid. 2413Fasten mounting brackets over screws by using two M3 wingn

Página 6 - IND034-051713

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interf