GE GPF525C Manual de Instalação descarregar pdf (Página 3)

STEP 3: INSTALL DOOR PANEL TRIM AND CUSTOM PANEL

• Place bottom trim against the bottom of the door panel and

drive center screw, then left and right screws. Use the

8 - 18 x 5/16" color-matched screws provided.

• Slide “Z” shaped trim under the escutcheon.

• Slide custom door panel under the “Z” trim

and bottom trim.

• The notch on the side trim pieces goes towards the front.

Slide side trim up and under the escutcheon and over the

edge of the custom panel.

• Use masking tape to hold trim tightly against the custom

panel.

• Use the holes in the side trim pieces to locate, center punch,

and then drill 1/8" holes in the dishwasher panel. Use care

when performing this operation to prevent damage to the

side trim.

• Fasten the trim to the dishwasher door panel with the

8 - 18 x 5/16" color-matched screws.

• Remove tape.



















Drill 1/8" Holes

and Install Screws

05C-1277J

Escutcheon













1 2 3 4

Sem comentários

GE GPF525C Manual de Instalação Página 3