GE GS Series Guia de Instalação descarregar pdf (Página 3)

Squeeze the two tray clips to release the geartray.

Lift geartray from housing.

Remove one or two of the end plug(s) as needed

to wire the unit to the AC line.

Install a water-tight tting (be sure to install the

tting washer) and feed the AC line wire through

the tting.

Push down until clips

click into place

AC line

Squeeze to release

Connect the AC line to the black (line) and white

(neutral) input wires of the LED driver using

14-18AWG twist-on wire connectors. Connect the

ground wire to the green grounding screw.

Reattach the geartray making sure the two tray

clips are properly engaged.

1 2 3 4

Sem comentários

GE GS Series Guia de Instalação Página 3