GE PT878GC Manual do Utilizador descarregar pdf (Página 42)

100

101

April 2004

3-10

Installing the Fixture (cont.)

The two fixture halves have measuring scales; ensure that the

scales are on the same side of the fixture, so that both zeros start

at the same origin, as shown in Figure 3-8 below.

Figure 3-8: Fixture with Scale Origins Properly Aligned

3. Install the four nuts onto the threaded rods with the convex

side of the nut facing the fixture. Hand tighten the nuts on

each V block evenly, as shown in Figure 3-9 below. Do not

use a cross tightening pattern on the four installation nuts.

Figure 3-9: Installing Nuts onto the Fixture

0 1 2 3

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 307 308

Comentários a estes Manuais

Sem comentários

GE PT878GC Manual do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo GE PT878GC